Performance measurements of a depth-encoding TraPET detector module

초록

The new method to correct a parallax error and the loss of coincidence counts caused by the gap between modules was developed for a small animal PET scanner. We proposed the TraPET scanner composed of 6 dual-layer phoswich detector modules. Each detector module consists of a 5.0 mm-thick trapezoidal-shaped monolithic LSO crystal and a 23 x 23 array of GSO crystal. The layer of interaction is identified by the pulse shape discrimination method. One detector module was built and the algorithm for layer identification was optimized. The dual-layer crystals were optically coupled to a Hamamatsu H8500 position-sensitive PMT and a resistive charge divider was used to multiplex 64-channel anode outputs into 4-channel position signals. The 4 signals have been sampled continuously by 14-bit ADC at a sampling rate of 105 MHz and the pulse shape discrimination algorithm was achieved through FPGA programming. The detector module was irradiated with a Na-22 point source from the side of the crystals to obtain flood images of each layer and two layers were clearly identified, thus verifying the DOI capability. The TraPET detector proved to be a reliable design for correcting the parallax error and improving the sensitivity simultaneously in the small animal PET.

키워드